Investor Club ERC721 token

Ответить
admin
Site Admin
Сообщения: 12
Зарегистрирован: Сб сен 14, 2019 9:20 am

Investor Club ERC721 token

Сообщение admin » Пт окт 11, 2019 10:47 pm

Код: Выделить всё

// File: @openzeppelin/contracts/introspection/IERC165.sol

pragma solidity ^0.5.0;

/**
 * @dev Interface of the ERC165 standard, as defined in the
 * [EIP](https://eips.ethereum.org/EIPS/eip-165).
 *
 * Implementers can declare support of contract interfaces, which can then be
 * queried by others (`ERC165Checker`).
 *
 * For an implementation, see `ERC165`.
 */
interface IERC165 {
    /**
     * @dev Returns true if this contract implements the interface defined by
     * `interfaceId`. See the corresponding
     * [EIP section](https://eips.ethereum.org/EIPS/eip-165#how-interfaces-are-identified)
     * to learn more about how these ids are created.
     *
     * This function call must use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool);
}

// File: @openzeppelin/contracts/token/ERC721/IERC721.sol

pragma solidity ^0.5.0;

/**
 * @dev Required interface of an ERC721 compliant contract.
 */
contract IERC721 is IERC165 {
    event Transfer(address indexed from, address indexed to, uint256 indexed tokenId);
    event Approval(address indexed owner, address indexed approved, uint256 indexed tokenId);
    event ApprovalForAll(address indexed owner, address indexed operator, bool approved);

    /**
     * @dev Returns the number of NFTs in `owner`'s account.
     */
    function balanceOf(address owner) public view returns (uint256 balance);

    /**
     * @dev Returns the owner of the NFT specified by `tokenId`.
     */
    function ownerOf(uint256 tokenId) public view returns (address owner);

    /**
     * @dev Transfers a specific NFT (`tokenId`) from one account (`from`) to
     * another (`to`).
     *
     * 
     *
     * Requirements:
     * - `from`, `to` cannot be zero.
     * - `tokenId` must be owned by `from`.
     * - If the caller is not `from`, it must be have been allowed to move this
     * NFT by either `approve` or `setApproveForAll`.
     */
    function safeTransferFrom(address from, address to, uint256 tokenId) public;
    /**
     * @dev Transfers a specific NFT (`tokenId`) from one account (`from`) to
     * another (`to`).
     *
     * Requirements:
     * - If the caller is not `from`, it must be approved to move this NFT by
     * either `approve` or `setApproveForAll`.
     */
    function transferFrom(address from, address to, uint256 tokenId) public;
    function approve(address to, uint256 tokenId) public;
    function getApproved(uint256 tokenId) public view returns (address operator);

    function setApprovalForAll(address operator, bool _approved) public;
    function isApprovedForAll(address owner, address operator) public view returns (bool);


    function safeTransferFrom(address from, address to, uint256 tokenId, bytes memory data) public;
}

// File: @openzeppelin/contracts/token/ERC721/IERC721Receiver.sol

pragma solidity ^0.5.0;

/**
 * @title ERC721 token receiver interface
 * @dev Interface for any contract that wants to support safeTransfers
 * from ERC721 asset contracts.
 */
contract IERC721Receiver {
    /**
     * @notice Handle the receipt of an NFT
     * @dev The ERC721 smart contract calls this function on the recipient
     * after a `safeTransfer`. This function MUST return the function selector,
     * otherwise the caller will revert the transaction. The selector to be
     * returned can be obtained as `this.onERC721Received.selector`. This
     * function MAY throw to revert and reject the transfer.
     * Note: the ERC721 contract address is always the message sender.
     * @param operator The address which called `safeTransferFrom` function
     * @param from The address which previously owned the token
     * @param tokenId The NFT identifier which is being transferred
     * @param data Additional data with no specified format
     * @return bytes4 `bytes4(keccak256("onERC721Received(address,address,uint256,bytes)"))`
     */
    function onERC721Received(address operator, address from, uint256 tokenId, bytes memory data)
    public returns (bytes4);
}

// File: @openzeppelin/contracts/math/SafeMath.sol

pragma solidity ^0.5.0;

/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");

        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b <= a, "SafeMath: subtraction overflow");
        uint256 c = a - b;

        return c;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) {
            return 0;
        }

        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");

        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers. Reverts on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        // Solidity only automatically asserts when dividing by 0
        require(b > 0, "SafeMath: division by zero");
        uint256 c = a / b;
        // assert(a == b * c + a % b); // There is no case in which this doesn't hold

        return c;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * Reverts when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b != 0, "SafeMath: modulo by zero");
        return a % b;
    }
}

// File: @openzeppelin/contracts/utils/Address.sol

pragma solidity ^0.5.0;

/**
 * @dev Collection of functions related to the address type,
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * This test is non-exhaustive, and there may be false-negatives: during the
     * execution of a contract's constructor, its address will be reported as
     * not containing a contract.
     *
     * > It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies in extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.

        uint256 size;
        // solhint-disable-next-line no-inline-assembly
        assembly { size := extcodesize(account) }
        return size > 0;
    }
}

// File: @openzeppelin/contracts/drafts/Counters.sol

pragma solidity ^0.5.0;


/**
 * @title Counters
 * @author Matt Condon (@shrugs)
 * @dev Provides counters that can only be incremented or decremented by one. This can be used e.g. to track the number
 * of elements in a mapping, issuing ERC721 ids, or counting request ids.
 *
 * Include with `using Counters for Counters.Counter;`
 * Since it is not possible to overflow a 256 bit integer with increments of one, `increment` can skip the SafeMath
 * overflow check, thereby saving gas. This does assume however correct usage, in that the underlying `_value` is never
 * directly accessed.
 */
library Counters {
    using SafeMath for uint256;

    struct Counter {
        // This variable should never be directly accessed by users of the library: interactions must be restricted to
        // the library's function. As of Solidity v0.5.2, this cannot be enforced, though there is a proposal to add
        // this feature: see https://github.com/ethereum/solidity/issues/4637
        uint256 _value; // default: 0
    }

    function current(Counter storage counter) internal view returns (uint256) {
        return counter._value;
    }

    function increment(Counter storage counter) internal {
        counter._value += 1;
    }

    function decrement(Counter storage counter) internal {
        counter._value = counter._value.sub(1);
    }
}

// File: @openzeppelin/contracts/introspection/ERC165.sol

pragma solidity ^0.5.0;


/**
 * @dev Implementation of the `IERC165` interface.
 *
 * Contracts may inherit from this and call `_registerInterface` to declare
 * their support of an interface.
 */
contract ERC165 is IERC165 {
    /*
     * bytes4(keccak256('supportsInterface(bytes4)')) == 0x01ffc9a7
     */
    bytes4 private constant _INTERFACE_ID_ERC165 = 0x01ffc9a7;

    /**
     * @dev Mapping of interface ids to whether or not it's supported.
     */
    mapping(bytes4 => bool) private _supportedInterfaces;

    constructor () internal {
        // Derived contracts need only register support for their own interfaces,
        // we register support for ERC165 itself here
        _registerInterface(_INTERFACE_ID_ERC165);
    }

    /**
     * @dev See `IERC165.supportsInterface`.
     *
     * Time complexity O(1), guaranteed to always use less than 30 000 gas.
     */
    function supportsInterface(bytes4 interfaceId) external view returns (bool) {
        return _supportedInterfaces[interfaceId];
    }

    /**
     * @dev Registers the contract as an implementer of the interface defined by
     * `interfaceId`. Support of the actual ERC165 interface is automatic and
     * registering its interface id is not required.
     *
     * See `IERC165.supportsInterface`.
     *
     * Requirements:
     *
     * - `interfaceId` cannot be the ERC165 invalid interface (`0xffffffff`).
     */
    function _registerInterface(bytes4 interfaceId) internal {
        require(interfaceId != 0xffffffff, "ERC165: invalid interface id");
        _supportedInterfaces[interfaceId] = true;
    }
}

// File: @openzeppelin/contracts/token/ERC721/ERC721.sol

pragma solidity ^0.5.0;







/**
 * @title ERC721 Non-Fungible Token Standard basic implementation
 * @dev see https://eips.ethereum.org/EIPS/eip-721
 */
contract ERC721 is ERC165, IERC721 {
    using SafeMath for uint256;
    using Address for address;
    using Counters for Counters.Counter;

    // Equals to `bytes4(keccak256("onERC721Received(address,address,uint256,bytes)"))`
    // which can be also obtained as `IERC721Receiver(0).onERC721Received.selector`
    bytes4 private constant _ERC721_RECEIVED = 0x150b7a02;

    // Mapping from token ID to owner
    mapping (uint256 => address) private _tokenOwner;

    // Mapping from token ID to approved address
    mapping (uint256 => address) private _tokenApprovals;

    // Mapping from owner to number of owned token
    mapping (address => Counters.Counter) private _ownedTokensCount;

    // Mapping from owner to operator approvals
    mapping (address => mapping (address => bool)) private _operatorApprovals;

    /*
     *     bytes4(keccak256('balanceOf(address)')) == 0x70a08231
     *     bytes4(keccak256('ownerOf(uint256)')) == 0x6352211e
     *     bytes4(keccak256('approve(address,uint256)')) == 0x095ea7b3
     *     bytes4(keccak256('getApproved(uint256)')) == 0x081812fc
     *     bytes4(keccak256('setApprovalForAll(address,bool)')) == 0xa22cb465
     *     bytes4(keccak256('isApprovedForAll(address,address)')) == 0xe985e9c
     *     bytes4(keccak256('transferFrom(address,address,uint256)')) == 0x23b872dd
     *     bytes4(keccak256('safeTransferFrom(address,address,uint256)')) == 0x42842e0e
     *     bytes4(keccak256('safeTransferFrom(address,address,uint256,bytes)')) == 0xb88d4fde
     *
     *     => 0x70a08231 ^ 0x6352211e ^ 0x095ea7b3 ^ 0x081812fc ^
     *        0xa22cb465 ^ 0xe985e9c ^ 0x23b872dd ^ 0x42842e0e ^ 0xb88d4fde == 0x80ac58cd
     */
    bytes4 private constant _INTERFACE_ID_ERC721 = 0x80ac58cd;

    constructor () public {
        // register the supported interfaces to conform to ERC721 via ERC165
        _registerInterface(_INTERFACE_ID_ERC721);
    }

    /**
     * @dev Gets the balance of the specified address.
     * @param owner address to query the balance of
     * @return uint256 representing the amount owned by the passed address
     */
    function balanceOf(address owner) public view returns (uint256) {
        require(owner != address(0), "ERC721: balance query for the zero address");

        return _ownedTokensCount[owner].current();
    }

    /**
     * @dev Gets the owner of the specified token ID.
     * @param tokenId uint256 ID of the token to query the owner of
     * @return address currently marked as the owner of the given token ID
     */
    function ownerOf(uint256 tokenId) public view returns (address) {
        address owner = _tokenOwner[tokenId];
        require(owner != address(0), "ERC721: owner query for nonexistent token");

        return owner;
    }

    /**
     * @dev Approves another address to transfer the given token ID
     * The zero address indicates there is no approved address.
     * There can only be one approved address per token at a given time.
     * Can only be called by the token owner or an approved operator.
     * @param to address to be approved for the given token ID
     * @param tokenId uint256 ID of the token to be approved
     */
    function approve(address to, uint256 tokenId) public {
        address owner = ownerOf(tokenId);
        require(to != owner, "ERC721: approval to current owner");

        require(msg.sender == owner || isApprovedForAll(owner, msg.sender),
            "ERC721: approve caller is not owner nor approved for all"
        );

        _tokenApprovals[tokenId] = to;
        emit Approval(owner, to, tokenId);
    }

    /**
     * @dev Gets the approved address for a token ID, or zero if no address set
     * Reverts if the token ID does not exist.
     * @param tokenId uint256 ID of the token to query the approval of
     * @return address currently approved for the given token ID
     */
    function getApproved(uint256 tokenId) public view returns (address) {
        require(_exists(tokenId), "ERC721: approved query for nonexistent token");

        return _tokenApprovals[tokenId];
    }

    /**
     * @dev Sets or unsets the approval of a given operator
     * An operator is allowed to transfer all tokens of the sender on their behalf.
     * @param to operator address to set the approval
     * @param approved representing the status of the approval to be set
     */
    function setApprovalForAll(address to, bool approved) public {
        require(to != msg.sender, "ERC721: approve to caller");

        _operatorApprovals[msg.sender][to] = approved;
        emit ApprovalForAll(msg.sender, to, approved);
    }

    /**
     * @dev Tells whether an operator is approved by a given owner.
     * @param owner owner address which you want to query the approval of
     * @param operator operator address which you want to query the approval of
     * @return bool whether the given operator is approved by the given owner
     */
    function isApprovedForAll(address owner, address operator) public view returns (bool) {
        return _operatorApprovals[owner][operator];
    }

    /**
     * @dev Transfers the ownership of a given token ID to another address.
     * Usage of this method is discouraged, use `safeTransferFrom` whenever possible.
     * Requires the msg.sender to be the owner, approved, or operator.
     * @param from current owner of the token
     * @param to address to receive the ownership of the given token ID
     * @param tokenId uint256 ID of the token to be transferred
     */
    function transferFrom(address from, address to, uint256 tokenId) public {
        //solhint-disable-next-line max-line-length
        require(_isApprovedOrOwner(msg.sender, tokenId), "ERC721: transfer caller is not owner nor approved");

        _transferFrom(from, to, tokenId);
    }

    /**
     * @dev Safely transfers the ownership of a given token ID to another address
     * If the target address is a contract, it must implement `onERC721Received`,
     * which is called upon a safe transfer, and return the magic value
     * `bytes4(keccak256("onERC721Received(address,address,uint256,bytes)"))`; otherwise,
     * the transfer is reverted.
     * Requires the msg.sender to be the owner, approved, or operator
     * @param from current owner of the token
     * @param to address to receive the ownership of the given token ID
     * @param tokenId uint256 ID of the token to be transferred
     */
    function safeTransferFrom(address from, address to, uint256 tokenId) public {
        safeTransferFrom(from, to, tokenId, "");
    }

    /**
     * @dev Safely transfers the ownership of a given token ID to another address
     * If the target address is a contract, it must implement `onERC721Received`,
     * which is called upon a safe transfer, and return the magic value
     * `bytes4(keccak256("onERC721Received(address,address,uint256,bytes)"))`; otherwise,
     * the transfer is reverted.
     * Requires the msg.sender to be the owner, approved, or operator
     * @param from current owner of the token
     * @param to address to receive the ownership of the given token ID
     * @param tokenId uint256 ID of the token to be transferred
     * @param _data bytes data to send along with a safe transfer check
     */
    function safeTransferFrom(address from, address to, uint256 tokenId, bytes memory _data) public {
        transferFrom(from, to, tokenId);
        require(_checkOnERC721Received(from, to, tokenId, _data), "ERC721: transfer to non ERC721Receiver implementer");
    }

    /**
     * @dev Returns whether the specified token exists.
     * @param tokenId uint256 ID of the token to query the existence of
     * @return bool whether the token exists
     */
    function _exists(uint256 tokenId) internal view returns (bool) {
        address owner = _tokenOwner[tokenId];
        return owner != address(0);
    }

    /**
     * @dev Returns whether the given spender can transfer a given token ID.
     * @param spender address of the spender to query
     * @param tokenId uint256 ID of the token to be transferred
     * @return bool whether the msg.sender is approved for the given token ID,
     * is an operator of the owner, or is the owner of the token
     */
    function _isApprovedOrOwner(address spender, uint256 tokenId) internal view returns (bool) {
        require(_exists(tokenId), "ERC721: operator query for nonexistent token");
        address owner = ownerOf(tokenId);
        return (spender == owner || getApproved(tokenId) == spender || isApprovedForAll(owner, spender));
    }

    /**
     * @dev Internal function to mint a new token.
     * Reverts if the given token ID already exists.
     * @param to The address that will own the minted token
     * @param tokenId uint256 ID of the token to be minted
     */
    function _mint(address to, uint256 tokenId) internal {
        require(to != address(0), "ERC721: mint to the zero address");
        require(!_exists(tokenId), "ERC721: token already minted");

        _tokenOwner[tokenId] = to;
        _ownedTokensCount[to].increment();

        emit Transfer(address(0), to, tokenId);
    }

    /**
     * @dev Internal function to burn a specific token.
     * Reverts if the token does not exist.
     * Deprecated, use _burn(uint256) instead.
     * @param owner owner of the token to burn
     * @param tokenId uint256 ID of the token being burned
     */
    function _burn(address owner, uint256 tokenId) internal {
        require(ownerOf(tokenId) == owner, "ERC721: burn of token that is not own");

        _clearApproval(tokenId);

        _ownedTokensCount[owner].decrement();
        _tokenOwner[tokenId] = address(0);

        emit Transfer(owner, address(0), tokenId);
    }

    /**
     * @dev Internal function to burn a specific token.
     * Reverts if the token does not exist.
     * @param tokenId uint256 ID of the token being burned
     */
    function _burn(uint256 tokenId) internal {
        _burn(ownerOf(tokenId), tokenId);
    }

    /**
     * @dev Internal function to transfer ownership of a given token ID to another address.
     * As opposed to transferFrom, this imposes no restrictions on msg.sender.
     * @param from current owner of the token
     * @param to address to receive the ownership of the given token ID
     * @param tokenId uint256 ID of the token to be transferred
     */
    function _transferFrom(address from, address to, uint256 tokenId) internal {
        require(ownerOf(tokenId) == from, "ERC721: transfer of token that is not own");
        require(to != address(0), "ERC721: transfer to the zero address");

        _clearApproval(tokenId);

        _ownedTokensCount[from].decrement();
        _ownedTokensCount[to].increment();

        _tokenOwner[tokenId] = to;

        emit Transfer(from, to, tokenId);
    }

    /**
     * @dev Internal function to invoke `onERC721Received` on a target address.
     * The call is not executed if the target address is not a contract.
     *
     * This function is deprecated.
     * @param from address representing the previous owner of the given token ID
     * @param to target address that will receive the tokens
     * @param tokenId uint256 ID of the token to be transferred
     * @param _data bytes optional data to send along with the call
     * @return bool whether the call correctly returned the expected magic value
     */
    function _checkOnERC721Received(address from, address to, uint256 tokenId, bytes memory _data)
        internal returns (bool)
    {
        if (!to.isContract()) {
            return true;
        }

        bytes4 retval = IERC721Receiver(to).onERC721Received(msg.sender, from, tokenId, _data);
        return (retval == _ERC721_RECEIVED);
    }

    /**
     * @dev Private function to clear current approval of a given token ID.
     * @param tokenId uint256 ID of the token to be transferred
     */
    function _clearApproval(uint256 tokenId) private {
        if (_tokenApprovals[tokenId] != address(0)) {
            _tokenApprovals[tokenId] = address(0);
        }
    }
}

// File: @openzeppelin/contracts/token/ERC721/IERC721Enumerable.sol

pragma solidity ^0.5.0;


/**
 * @title ERC-721 Non-Fungible Token Standard, optional enumeration extension
 * @dev See https://eips.ethereum.org/EIPS/eip-721
 */
contract IERC721Enumerable is IERC721 {
    function totalSupply() public view returns (uint256);
    function tokenOfOwnerByIndex(address owner, uint256 index) public view returns (uint256 tokenId);

    function tokenByIndex(uint256 index) public view returns (uint256);
}

// File: @openzeppelin/contracts/token/ERC721/ERC721Enumerable.sol

pragma solidity ^0.5.0;




/**
 * @title ERC-721 Non-Fungible Token with optional enumeration extension logic
 * @dev See https://eips.ethereum.org/EIPS/eip-721
 */
contract ERC721Enumerable is ERC165, ERC721, IERC721Enumerable {
    // Mapping from owner to list of owned token IDs
    mapping(address => uint256[]) private _ownedTokens;

    // Mapping from token ID to index of the owner tokens list
    mapping(uint256 => uint256) private _ownedTokensIndex;

    // Array with all token ids, used for enumeration
    uint256[] private _allTokens;

    // Mapping from token id to position in the allTokens array
    mapping(uint256 => uint256) private _allTokensIndex;

    /*
     *     bytes4(keccak256('totalSupply()')) == 0x18160ddd
     *     bytes4(keccak256('tokenOfOwnerByIndex(address,uint256)')) == 0x2f745c59
     *     bytes4(keccak256('tokenByIndex(uint256)')) == 0x4f6ccce7
     *
     *     => 0x18160ddd ^ 0x2f745c59 ^ 0x4f6ccce7 == 0x780e9d63
     */
    bytes4 private constant _INTERFACE_ID_ERC721_ENUMERABLE = 0x780e9d63;

    /**
     * @dev Constructor function.
     */
    constructor () public {
        // register the supported interface to conform to ERC721Enumerable via ERC165
        _registerInterface(_INTERFACE_ID_ERC721_ENUMERABLE);
    }

    /**
     * @dev Gets the token ID at a given index of the tokens list of the requested owner.
     * @param owner address owning the tokens list to be accessed
     * @param index uint256 representing the index to be accessed of the requested tokens list
     * @return uint256 token ID at the given index of the tokens list owned by the requested address
     */
    function tokenOfOwnerByIndex(address owner, uint256 index) public view returns (uint256) {
        require(index < balanceOf(owner), "ERC721Enumerable: owner index out of bounds");
        return _ownedTokens[owner][index];
    }

    /**
     * @dev Gets the total amount of tokens stored by the contract.
     * @return uint256 representing the total amount of tokens
     */
    function totalSupply() public view returns (uint256) {
        return _allTokens.length;
    }

    /**
     * @dev Gets the token ID at a given index of all the tokens in this contract
     * Reverts if the index is greater or equal to the total number of tokens.
     * @param index uint256 representing the index to be accessed of the tokens list
     * @return uint256 token ID at the given index of the tokens list
     */
    function tokenByIndex(uint256 index) public view returns (uint256) {
        require(index < totalSupply(), "ERC721Enumerable: global index out of bounds");
        return _allTokens[index];
    }

    /**
     * @dev Internal function to transfer ownership of a given token ID to another address.
     * As opposed to transferFrom, this imposes no restrictions on msg.sender.
     * @param from current owner of the token
     * @param to address to receive the ownership of the given token ID
     * @param tokenId uint256 ID of the token to be transferred
     */
    function _transferFrom(address from, address to, uint256 tokenId) internal {
        super._transferFrom(from, to, tokenId);

        _removeTokenFromOwnerEnumeration(from, tokenId);

        _addTokenToOwnerEnumeration(to, tokenId);
    }

    /**
     * @dev Internal function to mint a new token.
     * Reverts if the given token ID already exists.
     * @param to address the beneficiary that will own the minted token
     * @param tokenId uint256 ID of the token to be minted
     */
    function _mint(address to, uint256 tokenId) internal {
        super._mint(to, tokenId);

        _addTokenToOwnerEnumeration(to, tokenId);

        _addTokenToAllTokensEnumeration(tokenId);
    }

    /**
     * @dev Internal function to burn a specific token.
     * Reverts if the token does not exist.
     * Deprecated, use _burn(uint256) instead.
     * @param owner owner of the token to burn
     * @param tokenId uint256 ID of the token being burned
     */
    function _burn(address owner, uint256 tokenId) internal {
        super._burn(owner, tokenId);

        _removeTokenFromOwnerEnumeration(owner, tokenId);
        // Since tokenId will be deleted, we can clear its slot in _ownedTokensIndex to trigger a gas refund
        _ownedTokensIndex[tokenId] = 0;

        _removeTokenFromAllTokensEnumeration(tokenId);
    }

    /**
     * @dev Gets the list of token IDs of the requested owner.
     * @param owner address owning the tokens
     * @return uint256[] List of token IDs owned by the requested address
     */
    function _tokensOfOwner(address owner) internal view returns (uint256[] storage) {
        return _ownedTokens[owner];
    }

    /**
     * @dev Private function to add a token to this extension's ownership-tracking data structures.
     * @param to address representing the new owner of the given token ID
     * @param tokenId uint256 ID of the token to be added to the tokens list of the given address
     */
    function _addTokenToOwnerEnumeration(address to, uint256 tokenId) private {
        _ownedTokensIndex[tokenId] = _ownedTokens[to].length;
        _ownedTokens[to].push(tokenId);
    }

    /**
     * @dev Private function to add a token to this extension's token tracking data structures.
     * @param tokenId uint256 ID of the token to be added to the tokens list
     */
    function _addTokenToAllTokensEnumeration(uint256 tokenId) private {
        _allTokensIndex[tokenId] = _allTokens.length;
        _allTokens.push(tokenId);
    }

    /**
     * @dev Private function to remove a token from this extension's ownership-tracking data structures. Note that
     * while the token is not assigned a new owner, the _ownedTokensIndex mapping is _not_ updated: this allows for
     * gas optimizations e.g. when performing a transfer operation (avoiding double writes).
     * This has O(1) time complexity, but alters the order of the _ownedTokens array.
     * @param from address representing the previous owner of the given token ID
     * @param tokenId uint256 ID of the token to be removed from the tokens list of the given address
     */
    function _removeTokenFromOwnerEnumeration(address from, uint256 tokenId) private {
        // To prevent a gap in from's tokens array, we store the last token in the index of the token to delete, and
        // then delete the last slot (swap and pop).

        uint256 lastTokenIndex = _ownedTokens[from].length.sub(1);
        uint256 tokenIndex = _ownedTokensIndex[tokenId];

        // When the token to delete is the last token, the swap operation is unnecessary
        if (tokenIndex != lastTokenIndex) {
            uint256 lastTokenId = _ownedTokens[from][lastTokenIndex];

            _ownedTokens[from][tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
            _ownedTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index
        }

        // This also deletes the contents at the last position of the array
        _ownedTokens[from].length--;

        // Note that _ownedTokensIndex[tokenId] hasn't been cleared: it still points to the old slot (now occupied by
        // lastTokenId, or just over the end of the array if the token was the last one).
    }

    /**
     * @dev Private function to remove a token from this extension's token tracking data structures.
     * This has O(1) time complexity, but alters the order of the _allTokens array.
     * @param tokenId uint256 ID of the token to be removed from the tokens list
     */
    function _removeTokenFromAllTokensEnumeration(uint256 tokenId) private {
        // To prevent a gap in the tokens array, we store the last token in the index of the token to delete, and
        // then delete the last slot (swap and pop).

        uint256 lastTokenIndex = _allTokens.length.sub(1);
        uint256 tokenIndex = _allTokensIndex[tokenId];

        // When the token to delete is the last token, the swap operation is unnecessary. However, since this occurs so
        // rarely (when the last minted token is burnt) that we still do the swap here to avoid the gas cost of adding
        // an 'if' statement (like in _removeTokenFromOwnerEnumeration)
        uint256 lastTokenId = _allTokens[lastTokenIndex];

        _allTokens[tokenIndex] = lastTokenId; // Move the last token to the slot of the to-delete token
        _allTokensIndex[lastTokenId] = tokenIndex; // Update the moved token's index

        // This also deletes the contents at the last position of the array
        _allTokens.length--;
        _allTokensIndex[tokenId] = 0;
    }
}

// File: @openzeppelin/contracts/token/ERC721/IERC721Metadata.sol

pragma solidity ^0.5.0;

/**
 * @title ERC-721 Non-Fungible Token Standard, optional metadata extension
 * @dev See https://eips.ethereum.org/EIPS/eip-721
 */
contract IERC721Metadata is IERC721 {
    function name() external view returns (string memory);
    function symbol() external view returns (string memory);
    function tokenProjectGUID(uint256 tokenId) external view returns (string memory);
}

// File: @openzeppelin/contracts/token/ERC721/ERC721Metadata.sol

pragma solidity ^0.5.0;

contract ERC721Metadata is ERC165, ERC721, IERC721Metadata {
    // Token name
    string private _name;

    // Token symbol
    string private _symbol;

    struct tokenMetaData {
      string projectGUID;
      string projectName;
      uint amount;
      uint created;
      bool paid;
    }

    mapping(uint256 => tokenMetaData) private _tokenMetaData;

    /*
     *     bytes4(keccak256('name()')) == 0x06fdde03
     *     bytes4(keccak256('symbol()')) == 0x95d89b41
     *     bytes4(keccak256('tokenProjectGUID(uint256 tokenId)')) == 0x49199441
     *     bytes4(keccak256('tokenProjectName(uint256 tokenId)')) == 0xd5c37329
     *     bytes4(keccak256('tokenAmount(uint256 tokenId)')) == 0x184a405a
     *     bytes4(keccak256('tokenCreated(uint256 tokenId)')) == 0x06e3ebfb
     *     bytes4(keccak256('tokenPaid(uint256 tokenId)')) == 0x3d37b4ed
     *
     *     => 0x06fdde03 ^ 0x95d89b41 ^ 0x49199441 ^ 0xd5c37329 ^ 0x184a405a ^ 0x06e3ebfb ^ 0x3d37b4ed == 0x2C61BD66
     */
    bytes4 private constant _INTERFACE_ID_ERC721_METADATA = 0x2C61BD66;

    /**
     * @dev Constructor function
     */
    constructor (string memory name, string memory symbol) public {
        _name = name;
        _symbol = symbol;

        // register the supported interfaces to conform to ERC721 via ERC165
        _registerInterface(_INTERFACE_ID_ERC721_METADATA);
    }

    /**
     * @dev Gets the token name.
     * @return string representing the token name
     */
    function name() external view returns (string memory) {
        return _name;
    }

    /**
     * @dev Gets the token symbol.
     * @return string representing the token symbol
     */
    function symbol() external view returns (string memory) {
        return _symbol;
    }
    function tokenProjectGUID(uint256 tokenId) external view returns (string memory) {
        require(_exists(tokenId), "ERC721Metadata: ProjectGUID query for nonexistent token");
        return _tokenMetaData[tokenId].projectGUID;
    }
    function tokenProjectName(uint256 tokenId) external view returns (string memory) {
        require(_exists(tokenId), "ERC721Metadata: ProjectName query for nonexistent token");
        return _tokenMetaData[tokenId].projectName;
    }
    function tokenAmount(uint256 tokenId) external view returns (uint) {
        require(_exists(tokenId), "ERC721Metadata: amount query for nonexistent token");
        return _tokenMetaData[tokenId].amount;
    }
    function tokenCreated(uint256 tokenId) external view returns (uint) {
        require(_exists(tokenId), "ERC721Metadata: created query for nonexistent token");
        return _tokenMetaData[tokenId].created;
    }
    function tokenPaid(uint256 tokenId) external view returns (bool) {
        require(_exists(tokenId), "ERC721Metadata: paid query for nonexistent token");
        return _tokenMetaData[tokenId].paid;
    }
/*
    function getTokenMetaData(uint256 tokenId) external view returns (tokenMetaData memory) {
        require(_exists(tokenId), "ERC721Metadata: created query for nonexistent token");
        return _tokenMetaData[tokenId];
    }
*/
    function _setTokenProjectGUID(uint256 tokenId, string memory projectGUID) internal {
        require(_exists(tokenId), "ERC721Metadata: projectGUID set of nonexistent token");
        _tokenMetaData[tokenId].projectGUID = projectGUID;
    }
    function _setTokenprojectName(uint256 tokenId, string memory projectName) internal {
        require(_exists(tokenId), "ERC721Metadata: projectName set of nonexistent token");
        _tokenMetaData[tokenId].projectName = projectName;
    }
    function _setTokenAmount(uint256 tokenId, uint amount) internal {
        require(_exists(tokenId), "ERC721Metadata: amount set of nonexistent token");
        _tokenMetaData[tokenId].amount = amount;
    }
    function _setTokenCreated(uint256 tokenId, uint created) internal {
        require(_exists(tokenId), "ERC721Metadata: created date set of nonexistent token");
        _tokenMetaData[tokenId].created = created;
    }
    function _setTokenPaid(uint256 tokenId) internal {
        require(_exists(tokenId), "ERC721Metadata: paid set of nonexistent token");
        _tokenMetaData[tokenId].paid = true;
    }
    function _setTokenMetaData(uint256 tokenId, string memory projectGUID, string memory projectName, uint amount, uint created, bool paid) internal {
        require(_exists(tokenId), "ERC721Metadata: metadata set of nonexistent token");
        _tokenMetaData[tokenId].projectGUID = projectGUID;
        _tokenMetaData[tokenId].projectName = projectName;
        _tokenMetaData[tokenId].amount = amount;
        _tokenMetaData[tokenId].created = created;
        _tokenMetaData[tokenId].paid = paid;
    }

    /**
     * @dev Internal function to burn a specific token.
     * Reverts if the token does not exist.
     * Deprecated, use _burn(uint256) instead.
     * @param owner owner of the token to burn
     * @param tokenId uint256 ID of the token being burned by the msg.sender
     */
    function _burn(address owner, uint256 tokenId) internal {
        super._burn(owner, tokenId);

        bool needDelMetaData = false;

        // Clear metadata (if any)
        if (bytes(_tokenMetaData[tokenId].projectGUID).length != 0) {
            delete _tokenMetaData[tokenId].projectGUID;
            needDelMetaData = true;
        }
        if (bytes(_tokenMetaData[tokenId].projectName).length != 0) {
            delete _tokenMetaData[tokenId].projectName;
            needDelMetaData = true;
        }
        if (_tokenMetaData[tokenId].amount != 0) {
            delete _tokenMetaData[tokenId].amount;
            needDelMetaData = true;
        }
        if (_tokenMetaData[tokenId].created != 0) {
            delete _tokenMetaData[tokenId].created;
            needDelMetaData = true;
        }
        delete _tokenMetaData[tokenId].paid;
        if (needDelMetaData) {
            delete _tokenMetaData[tokenId];
        }
    }
}

// File: @openzeppelin/contracts/token/ERC721/ERC721Full.sol

pragma solidity ^0.5.0;

/**
 * @title Full ERC721 Token
 * This implementation includes all the required and some optional functionality of the ERC721 standard
 * Moreover, it includes approve all functionality using operator terminology
 * @dev see https://eips.ethereum.org/EIPS/eip-721
 */
contract ERC721Full is ERC721, ERC721Enumerable, ERC721Metadata {
    address payable contractOwner;
    constructor (string memory name, string memory symbol) public ERC721Metadata(name, symbol) {
      contractOwner = msg.sender;
        // solhint-disable-previous-line no-empty-blocks
    }
    modifier onlyOwner {
        require(
            msg.sender == contractOwner,
            "Only owner can call this function."
        );
        _;
    }
}

// File: contracts/integreen.sol

pragma solidity ^0.5.0;

contract integreen is ERC721Full {
    using Counters for Counters.Counter;
    Counters.Counter private _tokenIds;

    constructor() ERC721Full("InteGreen", "ITR") public {
    }

    function awardItem(address member, string memory projectGUID, string memory projectName, uint amount, uint created) public onlyOwner returns (uint256) {
        _tokenIds.increment();

        uint256 newItemId = _tokenIds.current();
        _mint(member, newItemId);
        _setTokenMetaData(newItemId, projectGUID, projectName, amount, created, false);

        return newItemId;
    }

    function divide(uint256 tokenId, uint amount) public returns (uint256) {
        require(_exists(tokenId), "InteGreen: divide of nonexistent token");
        require(ownerOf(tokenId) == msg.sender, "InteGreen: only the owner can divide");

//        tokenMetaData memory tmd = this.getTokenMetaData(tokenId);
        uint lvTokenAmount = this.tokenAmount(tokenId);
        require(lvTokenAmount > amount, "InteGreen: the amount should not exceed the existing token amount");

        _tokenIds.increment();

        uint256 newItemId = _tokenIds.current();
        _mint(msg.sender, newItemId);
//        _setTokenMetaData(newItemId, tmd.projectGUID, tmd.projectName, tmd.amount, tmd.created);
        _setTokenAmount(tokenId, lvTokenAmount - amount);
        _setTokenMetaData(newItemId, this.tokenProjectGUID(tokenId), this.tokenProjectName(tokenId), amount, this.tokenCreated(tokenId), this.tokenPaid(tokenId));

        return newItemId;
    }

    function setPaid(uint256 tokenId) public onlyOwner {
        require(_exists(tokenId), "InteGreen: set paid of nonexistent token");
        _setTokenPaid(tokenId);
    }
}

Ответить